Metrologic TECH 7 Uživatelský manuál stáhnout pdf (Strana 10)

Bar Code Configuration Methods

BAR CODE CONFIGURATION METHODS

Metrologic scanners can be bar code configured in two ways: the Single-Code Method

and the Multi-Code Method.

Single-Code Method

Most features can be enabled or disabled using the Single-Code Method.

1. Power up the scanner.

2. Scan the bar code(s) for the desired feature(s).

3. Observe a multi-toned, “save setting” beep that indicates the configuration has

been saved to NOVRAM.

Multi-Code Method

All features can be enabled or disabled using the Multi-Code Method.

A feature marked with a “~” requires the Multi-Code Method.

1. Power up the scanner.

2. Scan the Enter/Exit Configuration Mode bar code. [3 beeps]

3. Scan the bar code(s) for the desired feature(s). [1 beep]

4. Scan the Enter/Exit Configuration Mode bar code [3 beeps] and

save new configuration.

Enter/Exit Configuration Mode

³999999

To abort a configuration change, power off the scanner before scanning the

Enter/Exit Configuration Mode bar code.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 187 188

Žádné komentáře

Metrologic TECH 7 Uživatelský manuál Strana 10